Incoloy 800® is a nickel-chromium alloy with high strength and superb resistance & Incoloy 800H and 800 HT are nickel-iron-chromium alloys. Titanic Metal Overseas is a leading supplier and exporter of Incoloy 800/800H/800HT Buttweld & Forged Fittings. We provide Incoloy Alloy 800/800H/800HT Buttweld & Forged Fittings globally as per made-to-order requirements given by our highly valued clients, to meet the quality demands of our customers.
Titanic Metal Overseas exports a variety of Incoloy Alloy 800/800H/800HT Pipe Fittings (ASME SB-366 / ASME SB-564 / AMS 5766), Incoloy Alloy 800/800H/800HT Pipe Fittings Exporter in Mumbai India, Incoloy Alloy 800/800H/800HT Buttweld Fittings, Incoloy Alloy 800/800H/800HT Forged Fittings, ANSI B16.9 Incoloy Alloy 800/800H/800HT Buttweld & Forged Elbow, 800/800H/800HT Incoloy Alloy Buttweld & Forged Reducer Stockist, Incoloy Alloy UNS N08800/N08810/N08811 Pipe Fittings Exporters, Incoloy Alloy 800/800H/800HT Buttweld & Forged Tees Suppliers, ASME SB-366 / ASME SB-564 / AMS 5766 Incoloy 800/800H/800HT Long Radius Bend Pipe Fittings, 800/800H/800HT Incoloy Alloy Buttweld & Forged 90 deg Elbow, Incoloy DIN 1.4876/1.4958/1.4859 Pipe Fittings Exporter, 800/800H/800HT Incoloy Alloy Buttweld & Forged End Pipe Cap.
Incoloy Alloy 800 Pipe Fittings (UNS N08800 Pipe Fittings), Incoloy Alloy 800H Pipe Fittings (UNS N08810 Pipe Fittings) and Incoloy Alloy 800HT Pipe Fittings (UNS N08811 Pipe Fittings) are utilized as a part of an assortment of uses including introduction to high temperatures and destructive situations. WNR 1.4876 Fittings, WNR 1.4958 Pipe Fittings and WNR 1.4859 Pipe Fittings are utilized for warmth regarding gear, for example, bushel, plate and fixtures .We offer these Incoloy 800/800H/800HT Buttweld & Forged Fittings products in specially crafted shapes and sizes according to the prerequisites given by our customers, and that too at a moderate and market leading costs.
The Incoloy Alloy 800/800H/800HT Buttweld & Forged Fittings (UNS N08800/N08810/N08811) are used the following applications :-
1. Ethylene furnace quench boilers
2. Hydrocarbon cracking
3. Valves, fittings and other components exposed to corrosive attack from 1100-1800° F
4. Industrial furnaces
5. Heat-treating equipment
6. Chemical and petrochemical processing
7. Super-heater and re-heaters in power plants
8. Pressure vessels
9. Heat exchangers
C |
MN |
P |
S |
Si |
Cr |
Ni |
Mo |
Cu |
Co |
Cb+Ta |
Ti |
Al |
Fe |
Al+Ti |
Grain |
.10 max |
- |
- |
- |
- |
19.0 - 23.0 |
30.0 - 35.0 |
- |
- |
- |
- |
0.15 - 0.60 |
0.15 - 0.60 |
39.5 min |
0.30 1.20 |
- |
C |
MN |
P |
S |
Si |
Cr |
Ni |
Mo |
Cu |
Co |
Cb+Ta |
Ti |
Al |
Fe |
Al+Ti |
Grain |
.05 - .10 max |
- |
- |
- |
- |
19.0 - 23.0 |
30.0 - 35.0 |
- |
- |
- |
- |
0.15 - 0.60 |
0.15 - 0.60 |
39.5 min |
0.30 - 1.20 |
5 or coarser |
C |
MN |
P |
S |
Si |
Cr |
Ni |
Mo |
Cu |
Co |
Cb+Ta |
Ti |
Al |
Fe |
Al+Ti |
Grain |
.06 - .10 max |
- |
- |
- |
- |
19.0 - 23.0 |
30.0 - 35.0 |
- |
- |
- |
- |
0.25 - 0.60 |
0.25 - 0.60 |
39.5 min |
0.85 - 1.20 |
5 or coarser |
| Density | 7.94 g/cm3 |
| Melting Point | 1385 °C (2525 °F) |
| Tensile Strength | Psi – 75,000 , MPa – 520 |
| Yield Strength (0.2%Offset) | Psi – 30,000 , MPa –205 |
| Elongation | 30 % |
| Standards | ANSI/ASME B16.9, B16.28, MSS-SP-43. |
| Specification | ASME SB-366 / ASME SB-564 / AMS 5766 |
| Type | Seamless / Welded / Fabricated |
| Schedule | Sch 5 TO Sch XXS. |
| Size | ½”NB to 24″NB in Sch 10s, 40s, 80s, 160s, XXS |
| DImensions | ANSI/ASME B16.11 & BS3799, etc. |
| Specification | ASTM / ASME SB 564, ASTM / ASME SB 166, ASTM / ASME SB 366, ASTM / ASME SB 472 |
| Type | Socket Weld (S/W) & SCREWED (SCRD) – NPT, BSP, BSPT, Threaded Fittings |
| Class | 2000LBS, 3000LBS, 6000LBS, 9000LBS, etc. |
| Size | 1/8" TO 4" |
| Sheet/Plate | Round Bar/Wire | Pipe & Tubes | Fittings | Forgings |
| ASTM / ASME SB 168, ASTM / ASME SB 424 , ASTM / ASME SB 443 , ASTM / ASME SB 409 | ASTM B408 / ASME SB-408 | ASTM B407, ASTM B163, ASTM B358, ASTM B515, ASME SB407, ASME SB163, ASME SB358, ASME SB 515 | ASTM B366 / ASME SB-366 | ASTM B564 / ASME SB-564 |
Titanic Metal Overseas exports ASTM B366 / B564 Incoloy Alloy 800/800H/800HT(UNS N08800/N08810/N08811) Buttweld & Forged Fittings to Saudi Arabia, UAE, Bahrain, China, Peru, Nigeria, Jordan, Muscat, Kuwait, Dubai, Thailand (Bangkok), Venezuela, Germany, Canada, Russia, Australia, Vietnam, Kazaksthan, Jiddah, Libya, Yemen, Algeria, Qatar, Oman, Iran, United States Of America, United Kingdom, Australia, South Africa, Mexico, Turkey, France, European Union, New Zealand, Angola, Congo, Kenya, Lebanon, Spain, Indonesia, Malaysia, Lebanon, Iraq, Iran, Egypt, Madagascar, Sri Lanka, Denmark, Poland, Italy, Brazil, Sudan, Singapore And Netherlands.
For any enquiries related to ASTM B366 / B564 Incoloy Alloy 800/800H/800HT(UNS N08800/N08810/N08811) Buttweld & Forged Fittings, kindly contact us on :-
